Linear guides are precision parts, so they require considerable caution when using them. Even if high-performance linear guides are used, if they are used improperly, the expected performance will not be achieved, and the linear guides are easily damaged. In fact, the slider is like a human face. If it is not filled with oil, it will be dry, and it will be uncomfortable to exercise, that is, it is not smooth, and the end cap will not burst and the steel ball will drop for a long time.
Therefore, the following items should be noted when using linear guides:
1. Prevent rust
When picking up the linear guide directly by hand, wash away the sweat from your hands and apply high-quality mineral oil before operating. Pay special attention to rust prevention during the rainy season and summer.
2. Keep the environment clean
Keep the linear guide and its surroundings clean, even if tiny dust invisible to the naked eye enters the guide, it will increase the wear, vibration and noise of the guide.
3. Install carefully
The linear guide should be carefully used and installed, and strong punching is not allowed, direct hitting of the guide with a hammer is not allowed, and pressure transmission through rolling elements is not allowed.
4. Appropriate installation tools
Use appropriate and accurate installation tools for linear guides. Try to use special tools, and try to avoid using cloth and short fibers.
